Definition Of Procedure Text
Procedure text is a text that is designed to describe how something is achieved through a sequence of actions or steps. It explains how people perform different processes in a sequence of steps. This text uses simple present tense, often imperative sentences. It also uses the temporal conjunction such as first, second, then, next, finally, etc.
The generic structures of procedure text are :
1. Goal/aim ( or title)
2. Materials (not required for all procedural texts)
3. Steps (the actions that must be taken)
Example Of Procedure Text :
How To Make Kite Flying
Materials :
Butcher cord
Scotch tape or glue
1 Sheet of strong paper
2 Strong, straight wooden sticks of bamboo
Markers, paint or crayons
After the materials have been prepared, the directions bellow is easy instruction on how to make a kite:
1. Make a cross with the two sticks, with the shorter stick placed horizontally across the longer stick.
2. Tie the two sticks together with the string in such a way as to make sure that they are at right angles to each other.
3. Cut a notch at each end of the sticks. Make it deep enough for the type of string you are using to fit in to. Cut a piece of string long enough to stretch all around the kite frame.
4. Lay the sail material flat and place the stick frame face down on top. Cut around it, leaving about 2-3cm for a margin. Fold these edges over and glue it down so that the material is tight.
5. Make a tail by tying a small ribbon roughly every 10cm along the length of string.
6. Decorate your kite with the markers!
Procedure text is a text that is designed to describe how something is achieved through a sequence of actions or steps. It explains how people perform different processes in a sequence of steps. This text uses simple present tense, often imperative sentences. It also uses the temporal conjunction such as first, second, then, next, finally, etc.
The generic structures of procedure text are :
1. Goal/aim ( or title)
2. Materials (not required for all procedural texts)
3. Steps (the actions that must be taken)
Example Of Procedure Text :
How To Make Kite Flying
Materials :
Butcher cord
Scotch tape or glue
1 Sheet of strong paper
2 Strong, straight wooden sticks of bamboo
Markers, paint or crayons
After the materials have been prepared, the directions bellow is easy instruction on how to make a kite:
1. Make a cross with the two sticks, with the shorter stick placed horizontally across the longer stick.
2. Tie the two sticks together with the string in such a way as to make sure that they are at right angles to each other.
3. Cut a notch at each end of the sticks. Make it deep enough for the type of string you are using to fit in to. Cut a piece of string long enough to stretch all around the kite frame.
4. Lay the sail material flat and place the stick frame face down on top. Cut around it, leaving about 2-3cm for a margin. Fold these edges over and glue it down so that the material is tight.
5. Make a tail by tying a small ribbon roughly every 10cm along the length of string.
6. Decorate your kite with the markers!
0 Comment:
Post a Comment
Berkomentarlah dengan baik dan sopan